Telemetry reporting
Below listed telemetry reporting are available with the purchased package. No additional purchase is required.
- Included sensors / interface: Energy meter (Receiver voltage, Battery voltage, mAh consumed, Current), Temeprature (Internal automatically selected when the inlcuded external temperature probe is not used), RSSI out (3V to 0V) and displayed on transmitter A parameter
Telemetry receivers' feature
Comparision of Lemon Rx full-range telemetry capable diversity receiver.
- LM0051U and LM0052U will soon be available for purchase
- For (*1) V/I sensor may be required to purchase seperately on LM0051U, LM0052U and LM0041 if mAh consumed / current measurment is required
RCgroups discussion
V/I sensor calibration
- V/I sensor would normally not need calibration with the LM0052 bundled unit
- V/I sensor can be calibrated following section F of LM0041 user manual
Step for setting failsafe
Fail-safe activates when the receiver no longer receivers signal (Eg. Transmitter is off / signal loss). There are 3 possible setting which are:
- No signal output to servo
- Output predefined throttle signal only
- Output predefined signal for all channels
1) Insert bind plug
2) Provide power to the unit and bind the unit but do not remove bind plug
3) Set your transmitter to the perferred position as failsafe default output and hold it to this position.
3) press the button briefly will cause the green light to be in the following status. Press the button while maintain your perferred position of the channel:
- Green LED status - none: No pulse to servo with the absence of correct reception
- Green LED status - flashing: Throttle-only preset. Throttle position had been acquired as failsafe default output
- Green LED status - solid: All-channel preset. All channels' position had been acquired as failsafe default ouptut
4) Remove bind plug
5) Turn off the transmitter now while power is still provided to receiver. You can now observe the failsafe status when no transmitter signal is present to the receiver. Please becareful that your propeller may turns if you set throttle channel above 0% in the event of signal losses. Failsafe can be useful as a last rsource to save plane for unexpected situation when the receiver is no longer receiving signal from transmitter such as interference problem.
Specification
Type: |
Lemon Rx DSMP (DSMX compatible) 7-Channel Full-Range Telemetry with diversity receiver (Energy Meter) |
Number of Channel: |
7 |
Modulation: |
DSMP (DSMX and DSM2 compatible) |
Band: |
2.4 GHz |
Dimension: |
44(L) x 24(W) x 15(H) mm |
Weight: |
9.56g |
Voltage Range: |
4.5 - 8.5V |
Note:
1) This is not a Spektrum DSMX or DSM2 product, nor is it a copy of a Spektrum DSM2 or DSMX product. The Spektrum, TM1000, AR9020, DSMX and DSM2 brand is a trademark of Horizon Hobby, Inc.
2) This is not an underground black market fake Spektrum product. Lemon Rx quality is guaranteed.
3) Lemon Rx products are tested to be compatible with Spektrum's DSMX and or DSM2 product (Spketrum, DSMX and DSM2 are the registered trademark of Horizon Hobby, Inc.).
4) The Hobby King, R1020X V2 brand are the trademark of Hextronik Limited.